Parameters:
Applicable battery: 18650/21700 (two models optional)
Overcurrent capacity: 6A (changing the jumper plug to soldered connection can increase to 15A)
Series parallel combination: 1 series 4 parallel； 2 series and 2 parallel； 3 series and 1 parallel； 4 series and 1 parallel
The battery box can be freely combined through jumpers: 1 in series and 4 in parallel； 2 series and 2 parallel； 3 series and 1 parallel； 4 strings and 1 output in parallel.
Equipped with a series point voltage collection point (used for individual users to connect to the protection board or equalization board), with an output circuit normal indicator light, and a power consumption of approximately (0.0023ma-0.027ma)
Special attention:
*The batteries must be installed in the same direction. When changing the jumper combination, all jumper caps must be cleared first, and then connected one by one according to the diagram. Incorrect connections may cause a short circuit.
*The indicator light is used to display the normal output status of the circuit. The indicator light is connected in parallel to the total output terminal, and according to the series parallel combination, its power consumption is about 0.0023ma-0.027ma, fully charged with 18650 batteries
*Set 2 is shipped as loose parts and requires simple soldering iron assembly before use
Package include:
Package 1:
1X battery box (only battery box, excluding other accessories)
Package 2:
1X battery box
1X circuit board
1X jumper pin
6X Jumper Cap
1X output terminal
4X circuit board fixing clip
