SHXZ Diymore Bộ Điều Nhiệt XH-W3002 Cho Máy Ấp Trứng Bộ Điều Khiển Nhiệt Độ LED 220V Kỹ Thuật Số W3002 AC110-220V Bộ Điều Chỉnh Nhiệt Độ Máy Vi Tính Mô-đun Công Tắc

Thermostat control switch 10A Digital LED temperature controller with W3002 sensor probe

Product model: W3002

Temperature range: -50°C~110°C

Temperature control range: -50°C~110°C

Temperature measurement accuracy: ± 0.2 °C

AC 110-220V split type transformer, temperature control range: -50℃~+100℃, direct output.

Temperature control accuracy: ± 0.1 °C

Input power: DC12V/DC24V/AC220V

Output power: 120W/240W/1500W

Output type: direct output

Mounting hole distance: 73mm (aperture 4mm)

Appearance size: 60 × 45 × 31mm

Introduction to Code and Features:

P0 sets the initial temperature:

Press the SET button to enter the internal menu. The default display is P0. Press the SET button again to set the desired initial temperature with the up and down buttons.

P1 set the stop temperature:

Press the SET button to enter the internal menu, the P0 screen. Press the up and down buttons to change to P1. Press the SET button again to set the desired stop temperature.

P2 set temperature correction:

In the same way, enter the internal menu, change it to P2By pressing the up and down button, press the setting button again and set the desired calibration temperature by the up and down button. (Detection temperature + correction temperature = actual temperature)

P3 Set the default delay:

In the same way, enter the internal menu, change it to P3By pressing the up and down buttons, press the setting button again, and set the desired delay time by the up and down buttons, the unit is minutes. (Note: Delay start is generally used for compressor refrigeration. If English refrigerator freezer, this value must be set. According to the compressor back pressure, it is generally set for 3-6 minutes. If it is not used to control the refrigeration of the compressor, it is not necessary to expand. direct skip time function)

Cooling mode: start temperature > stop temperature (the program automatically determines the cooling mode)