SHXZ Diymore Máy Đo Năng Lượng Điện Áp Cường Độ Dòng Điện DC6-200V 20A Màn Hình Kỹ Thuật Số LCD Có Đèn Nền Đo Vôn Máy Kiểm Tra Dòng Điện

Features:

1.Electrical parameter measurement function (voltage, current, power, energy consumption, time, impedance)

2.Voltage alarm function (exceeding the voltage alarm threshold, backlight and voltage flashing prompt)

3.Overload alarm function (exceeding the power alarm threshold, backlight and power flashing prompt)

4.Clearing function of power and time buttons

5.Power failure data saving function

6.Backlight function.

Parameters:

Measuring voltage: DC6-200V

Measuring current: 0-20A

Measuring power: 0-4KW

Measured energy consumption: 0-99999KW

On load timing: 0-999 hours (zero overflow)

Measuring impedance: 0-999 Ω out of range display---

Overload alarm: settable

Voltage alarm: overvoltage and undervoltage can be set

Wiring type: fence terminal

Installation method: embedded

Module size: length * width * height 68mm * 68mm * 22mm

Product net weight: 58g

Panel opening: length * width 63mm * 63mm

Product parameters

Measuring voltage: DC6-200V

Measuring current: 0-20A

Measuring power: 0-4KW

Measured energy consumption: 0-99999KW

On load timing: 0-999 hours (zero overflow)

Measuring impedance: 0-999 Ω out of range display---

Overload alarm: settable

Voltage alarm: overvoltage and undervoltage can be set

Wiring type: fence terminal

Installation method: embedded

Module size: length * width * height 68mm * 68mm * 22mm

Product net weight: 58g

Panel opening: length * width 63mm * 63mm

Note: When wiring, positive and negative must be separated, and AC power cannot be input

Key description

1.Press the key briefly to switch power, energy consumption, time and impedance.

2.Press key 2 quickly to turn on or off the backlight.

3.Press and hold for 6 seconds to enter the setting mode.

4.Press and hold for 3 seconds to move to the next group.

5.Hold the key for 2 seconds in each group to automatically jump to the next group.

6.Without any operation, exit in 10 seconds and save the data.

Package include:

Monitor x1