SCULPFUN Laser Module Kit with 32-bit Motherboard - Achieve High-speed and Accurate Results on S9

Features: Compatibility Design: The upgrade kit has been designed to maintain a certain compatibility, it can also be upgraded to the SCULPFUN S9 laser engraver. All the accessories are included in the package. Enhanced Laser: The S9 laser machine upgrade kit adopts a single enhanced 6W diode, which makes its actual laser power and cutting ability higher. Compared with S9 laser engraver(5.5W cuts 3mm balsa wood and 3mm plywood in one pass time), S9 upgrade kit 22W can cut 20mm balsa wood and 15mm plywood in one pass time. Upgraded 32-bit Air Assist Motherboard: The latest 32-bit motherboard has a stronger computing and greatly improves the overall performance compared with S9(8-bit) main control board, which can realize faster cutting speed and more stable cutting effect. It supports automatic air assist control function, supports BT wireless connection to control the machine, and is not limited by the distance of the USB cable. High-speed Air Assist Pump: Significantly improve the cutting penetration and cutting efficiency with faster cutting speed and cleaner cutting surfaces. The high-speed airflow of 13.5m/s with high-pressure air-assist nozzle makes it can cut plywood and MDF panels more than 5 times faster, and cutting surfaces are cleaner and no smoky.  Standard S9 XY-axis Limit Switch: It is perfectly suitable for S9 laser machine and can be installed and used directly. After installing the limit switch, the machine will open the homing and positioning function, which is very suitable for repeated positioning or batch manufacturing work. Replaceable Protective Lens: S9 machine upgrade kit adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN. New Upgrade Laser Eye Shield: SCULPFUN S9 upgrade kit is equipped with a detachable glass eye shield, which will not be dazzling even if you don't wear glasses. In addition, you can easily disassemble it if you don't need it. Compatibility Design: The S9 upgrade kit has been designed to maintain a certain compatibility, and except for the S9 machine, it can also be upgraded to the  similar 2-axis laser machines. Specification: Product Model: S30 Ultra 22W Applicable Machines: SCULPFUN S9 Laser Information Diode laser output power: 22W Laser focus: 0.08x0.10mm Laser wavelength: 455±5nm Focusing method: 40mm fixed focus column + sliding device Laser protective cover: Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield. Laser shell material: 6063 Air Pump Type: main board controlled air pump, voltage 24V, flow rate 30L/min Air hose inner diameter: 7.5mm Motherboard 32-bit air assist motherb