Saramonic Đầu Nối DIN12M SR-VRMIC (Bốn Đầu Nối XLR) Cho Trải Nghiệm Âm Thanh Sống Động Micrô Chuyên Nghiệp Với Bốn Viên Nang Cardioid 14Mm Hoạt Động Với Định Dạng Ambisonics Sennheiser AMBEO A-B, Phần Mềm Tạo Tiếng Ồn & Harpex

SR-VRMIC 3D Microphone DIN1 2M Connector (Four XLR Connectors)

for Immersive 3D Sound Experience

The SR-VRMIC is a 3D microphone designed for 360 degrees spherical audio recording. It captures high-sensitivity and intelligibility audio, ideal for VR, Film, and Music and content creation of all kinds.

Four 14mm Cardioid Capsules in Tetrahedral Array capture 360 degrees spherical sound, providing a perfect 3D audio solution. This unique design allows you to capture the surrounding sound from one single point. Fully spherical ambisonics sound can perfectly match your VR video/spherical 360 content.

The SR-VRMIC is compatible with Sennheiser AMBEO A-B Format, NoiseMaker & Harpex Software, which is available as free download for VST, AU, and AAX format for your preferred Digital Audio Workstation for both PC and Mac. It makes recording editing become an easy work.

One SR-VRMIC microphone is enough to record 3D sound, which greatly saves you time, money, and manpower. Get one SR-VRMIC 3D microphone to improve your creativity and productivity.

Packing List

• SR-VRMIC Microphone×1
• Metal Mesh Windscreen×1
• Fur Windscreen×1
• 1m(3.3’) Female DIN12M to 4 Male XLR Audio Cable×1
• 1.5m(4.9’) DIN12M Extension Cable×1
• SR-SMC10 Shock Mount×1

Specifications

• Frequency Response： 20Hz-20kHz
• Acoustic Principle： Condenser
• Polar Pattern： 4xCardioid
• Sensitivity： -35±3dB (0dB=1/ubar at 1KHz)
• Output Impedance： 100Ω
• Signal-to-Noise Ratio： 80dB
• Max. SPL： 127dB SPL, 1kHz at 1% T.H.D
• Output Connector： DIN12M, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
• Power Requirement： 4*(11-52) V Phantom power, 2.0mA each
• Operating Temperature Range： -20℃~60℃(-4°F-140°F)
• Size： 26.5x106mm(1×4.2”)
• Weight： 417.8g(14.7 oz)