RCYAGO Digital Chlorine Tester Water PH Chlorine Tester 2 In 1 PH & CL2 Meter Swimming Pool Chlorine Tester Spa Chlorine Monitor Tester PC101 and PC104 Water Quality Analytical Device

Instruction: It could be widely used for testing PH and Chlorine for swimming pool and spa(only these two water can be tested), and it has the adjustment point for chlorine tester for maintaining accuracy; Plus, with high accurate long probe, it could give you fast responsible, accurate and reliable data for you to measure the water quality. (Recommended Chlorine Level for Pools and Spas is 1.2 to 1.7ppm; Recommended pH Level for Pools and Spas is 7.2 to 7.8)

Specifications

PC-101

【CL2 Measurement Range : 0.5-6.0 ppm】Recommended Chlorine Level for Swimming Pools and Spas is (1.2~1.7ppm).

【PH Measurement Range : 5.5-9.0】 Recommended PH for Swimming Pools and Spas is (7.2~7.8)

PC-104

PH Measurement range: 5.5-9.0ph

CL Measurement range: 0.2-3.0ppm

Product Name :

2 in 1 PH & CL2 Swimming Pool Water Quality Tester

Condition : 100% Brand New

Material : Plastic + Metal

Size : Approx. 18 x 11.6 x 3.1cm / 7.1" x 4.6" x 1.2"

Power Supply : 1 x 1.5V AA Batteries (Not Included)

Package Weight : 220g

Package Included :

1 x Water Quality Tester

1 x English Instructions

Notes:

ELECTRO-TESTER INSTRUCTIONS

To extend the life of your Pool Checker PC-101 and ensure accurate results, be sure to:

• Keep the switch in the OFF position (all the way toward “PH”) when not in use.
• Store in a cool, dry place away from sunlight.
• DO NOT immerse the probe in any liquid other than pool or spa water.
• Check the battery routinely for freshness—unit requires one “AA” 1.5 volt alkaline battery.

CHLORINE CALIBRATION – ADJUSTMENT POINT:

Before you use your electro-tester (ET) for the first time, you must adjust (calibrate) ET to match your swimming pool or spa water with the following sequence:

1. Test your pool or spa water using a conventional liquid test kit
2. Record the chlorine reading level as you will need (example: 1.5PPM)
3. No adjustment is required for pH

FINDING YOUR ET ADJUSTMENT POINT

1. Insert an AA 1.5 volt battery in the compartment inside the handle (positive side up).
2. Hold the ET in one hand and the probe in the other.
3. Insert the cleaned metal probes into the water up to black band.
4. Stir the water slightly with the probe.
5. With the probe still in the water, turn the wheel on the face of the tester all the way to the left towards ”CL”. Slowly turn the wheel back to the right until the needle matches the chlorine level you recorded with the convention liquid tester (Example 1.5)
6. Remove probes from the water without touching the wheel. Indicator will move all the way to the right and stop on a letter between A and E. This letter is your ADJUSTMENT POINT.

NOTE: Any time you use your Electro-Tester to test the chlorine level, you must adjust the meter to the “adjustment point” before testing.

How to Measure PH and Chlorine?

TESTING CHLORINE LEVEL:

Recommended Chlorine Level for Pools and Spas is 1.2 to 1.7ppm

1. Position the needle to your “adjustment point”
2. Holding the ET in one hand and the probes in the other, insert the probes into the water up to the black band. Wait until the needle rests for a better chlorine reading.
3. Leave the probes in the water and proceed with instructions for testing pH.

TESTING PH LEVEL:

Recommended pH Level for Pools and Spas is 7.2 to 7.8

A) With the probes still in the water, turn the wheel all the way to “pH” until it clicks (battery must off for pH reading)

B) Wait until the needle rests on the Ph reading.

C) Gently dry probes and insert into the holder on the side of the ET for storage.

Carefully read and follow usage instructions of all chemical containers

PH Standard for Swimming Pool & spa:

9.0~8.7: Add Acid; 8.7~7.0: Ideal; 6.8~0: Add Soda Ash;

Chlorine standard for Swimming Pool & spa:

6.0~4.0: Please take Caution; 4.0~2.0: Ideal; 2.0~0.5: Add Chlorine

Multiple scenarios:

This Water PH& Chlorine tester is special for swimming pool and spa, but for other water, please contact us for more infomation.

Long Probe with STRETCHABLE EXTENSION CORD

Elastic extension cord for extended distances for a variety of environmental measurements.

• Good elasticity
• Long distance
• Not deformed

Keywords:

Chlorine tester digital; swimming pool Chlorine tester;water ph Chlorine tester; Chlorine tester; water Chlorine tester; digital Chlorine tester; pool Chlorine tester; ph and Chlorine tester; water ph chlorine tester; swimming pool chlorine tester; chlorine tester for swimming pool; digital chlorine tester ; water chlorine tester; chlorine tester digital; Chlorine tester residual; residual chlorine meter; residual chlorine test kit; chlorine residual test kit; chlorine pool tester; swimming Pool chlorine tester; Pool chlorine tester; Water chlorine tester; water ph chlorine tester; water chlorine test kit; Chlorine tester digital; digital chlorine tester; digital chlorine meter;

FQA :

Q : Do you need to calibrate the pH and is there a pH calibration powder supplied?

A : There is no need to adjust the pH value. Therefore, no calibration powder is supplied.

Q : What is the type of battery? Is there a battery supplied?

A : The battery type is 1 x 1.5V AA Batteries (Not Included).

Q : How do I store the product?

A : Please store the tester in a cool, dry place.

Q : What should I do if I find that the product I received is damaged, the product does not work properly and the product I received does not match the product I ordered?

A : Please take a picture and a video of the received product (broken, inconsistent, not working) and the picture of the package sticker and contact our customer service, we have a professional technical team to solve the problem for you. Please understand that we may not be able to reply in time at night.