New Rc 25A / 35A ESC Brushless ESC 2S Waterproof Dustproof Electronical Speed Controller for 1/16 1/18 RC Car

25A ESC:

Cont.Current/Burst Current:25A/120A

Motor Type

Sensorless Brushless Motor

For 2s Lipo or 6 cells NIMH:

1.on-road：28XX-size or smaller motor with the KV<6000

2.Off-road/Buggy/Monster: 28XX-size or smaller motor with the KV<4000

For 3s Lipo or 9 cells NIMH:

1.on-road：28XX-size or smaller motor with the KV<4000

2.Off-road/Buggy/Monster: 28XX-size or smaller motor with the KV<3000

Instuctions

1. Connect BEC wires with the receiver

2. Connect motor wires with ESC

3. Turn on the transmitter

4. Connect battery pack with ESC then switch on the ESC.

5. When the connection of motor and battery is finished, the motor emits “Beep-Beep” tone.

6. When the throttle stick is in the neutral position, the motor re-emits “Beep-Beep” tone.

7. The ESC is workable.

35A ESC:

Cont.Current/Burst Current:35A/120A

Motor Type

Sensorless Brushless Motor

For 2s Lipo or 6 cells NIMH:

1.on-road：28XX-size or smaller motor with the KV<6000

2.Off-road/Buggy/Monster: 28XX-size or smaller motor with the KV<4000

For 3s Lipo or 9 cells NIMH:

1.on-road：28XX-size or smaller motor with the KV<4000

2.Off-road/Buggy/Monster: 28XX-size or smaller motor with the KV<3000

Instuctions

1. Connect BEC wires with the receiver

2. Connect motor wires with ESC

3. Turn on the transmitter

4. Connect battery pack with ESC then switch on the ESC.

5. When the connection of motor and battery is finished, the motor emits “Beep-Beep” tone.

6. When the throttle stick is in the neutral position, the motor re-emits “Beep-Beep” tone.

7. The ESC is workable.

• Water-proof and dust-proof for all-weather races;

(Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the

use for avoiding the connectors get rusty.)

• External programming port, easy to connect to the Program Card when setting the ESC;

• Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment;

• 9 steps of acceleration(punch) adjustment from “soft” to “Very aggressive” to fit for different kinds

of models, tires and tracks;

• Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss

protection / Motor lock-up protection;

• One-button(the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the

factory default settings;

• Compatible with the optional device-the portable Digital LED Program Card, especially convenient

for outdoor use.

Instuctions

1. Connect BEC wires with the receiver

2. Connect motor wires with ESC

3. Turn on the transmitter

4. Connect battery pack with ESC then switch on the ESC.

5. When the connection of motor and battery is finished, the motor emits"Beep-Beep"tone.

6. When the throttle stick is in the neutral position, the motor re-emits "Beep-Beep"tone.

7. The ESC is workable.

Package information:

Package size: 8.1* 5.5*1.2cm/3.18*2.16*0.47in

Package weight: 32g