MRCARTOOL V30 is designed for testing fuel injectors toidentify potential issues such as stucking, leakage, ordamage. It features six testing modes, allowing users tochoose the appropriate mode for injector testing basedon their specific requirements. Additionally,it can beused in conjunction with a fuel injector machine.
Compatible With Injector Cleaner Machine：It enhances the cleaning and testing of fuel injectors on other Injector Cleaner Machines by delivering pulse signals.
Adaptable With Various Fuel Injectors：It is equipped with two types adapter fittings for connecting both injectors and carb cleaner.
Widely Application：
Compatible with Bosch, Denso, Delphi, Siemens, Magnetic Marell fuel injectors( except Cylinder Direct-Injection Nozzle )
6 Testing Modes：
1. Long Pulse Mode：Continuous output of pulses with a pulse width of 100 milliseconds.
2.Quantitative Pulse Mode：Output of 100 pulses with a pulse width of 5 milliseconds each.
3.Quantitative Pulse Mode：Output of 1000 pulses with a pulse width of 3 milliseconds each.
4. Continuous Fuel Injection：Simulates idle state and continuously outputs pulses.
5.Continuous Fuel Injection：Simulates medium-speed state and continuously outputs pulses.
6. Continuous Fuel Injection：Simulates high-speed state and continuously outputs pulses.
Operating Steps：
1.Connect the adapter terminal to the fuel injector.
2.Insert the injector into the adapter fitting.
3.Choose the testing mode and press the Start button.
4.Press the injector onto the nozzle of the carb cleaner and observe the spray status of the injector.
Product Parameters：
Input Power：DC12V
Operating Environment：0℃~40℃, Relative Humidity：≤80%
Storage Environment：-20℃~50℃, Relative Humidity ：≤85%
