Mogami Cáp XLR 3.5mm jack đực sang đôi XLR nam cáp chia cho Micro âm thanh loa Console khuếch đại không cân bằng

Specifications

Interface type：3.5mm to 2*xlr
Wire：mogami 2944
Wire diameter：2.5mm*2
Wire material：OFC（Oxygen free copper）
Plug：NEUTRIK
Plug material：Copper
Welding：Hand soldering using 5% silver solder

------If you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.

Packing List

1piece*3.5mm to 2*xlr cable

NOTE

------Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting.

------About "0.2m-0.4m" by default, 0.4m will be sent directly, please leave a message if the length is

------Pure Japanese origin, small wire diameter and soft wire body, very flexible and space saving. The core configuration process is the same as the standard multi-microphone cable.

------2944 has a wide range of mid-to-treble, and the sound quality is clear and bright. The bass range is quite tight and the sense of shock is conservative, but the resolution is quite high.

a. Oxygen-free copper core
26Awg conductor 0.18 square, copper content as high as 99.99%, the sound is purer, the reduction degree is higher, and the fineness
The knots are richer, the dynamics are greater, and the impedance is lower.
b. Oxygen-free copper ground wire
The 25Awg conductor is 0.15 square, and the copper content is as high as 99.99%.
c. High temperature insulation layer insulation layer
XLpE (cross-linked polyethylene) is used. This material has very good electronic properties and can prevent
The shrinkage of the wire during high temperature welding.
d. Super soft skin
PVC is used, this material has very good toughness and elasticity, wear-resistant, durable, easy to bend,
Very soft, very flexible, 2.5mm outer diameter, suitable for various occasions.
e. 99.99% spiral oxygen-free copper shielding layer
Adopt ultra-high density spiral oxygen-free copper shield, the design of this shielding layer is better than that of aluminum foil or braided shield
Sound quality, and can effectively shield electromagnetic and radio frequency interference. Eliminate annoying background noise, humming, and humming.

-------The brand of connector we used for this custom cable assembly: TheNC3MXX- B is the latest and the highest-end Male XLR offering by Neutrik AG-Liechtenstein, the world's leading brand for professional audio connectors. XX series offers greater reliability, improves contact integrity and reduces cable strain, comes in a Black metal housing and features Gold plated contacts.

------The surface of the metal shell has a black paint to increase the texture. Look carefully at a part of the shell and cut it into a flat surface. The purpose is to increase the feel and facilitate the plugging. The main conductor is gold-plated with a thickness of 3μ, which is the signature design of MPS One, in addition to increasing the antioxidant capacity, it also improves the stability of signal transmission.
------Material: Brass with gold plating. Insulator heat resistance: 130℃

▲The welding is purely manual welding, and the solder joints are made of lead-free solder containing 5% silver with constant temperature welding, and each solder joint is full and smooth.

▲Each welding point is sealed with a heat shrinkable tube after welding to improve the oxidation resistance of the welding point and ensure a long sound
▲The same, while improving the tensile resistance and durability of the wire.

SPECIFICATIONS

▲Part No. ：2944
▲No. of Conductor ：2
Details：30/0.08 OFC
Size(mm2 )：0.15mm2 (#26AWG)
▲Insulation
Ov. Dia. (mm) ：1.0(0.039")
Material：XLPE( Cross-Linked Polyethylene )
Colors：Red/Clear
▲Drain Wire
Details：7/0.18A
Size：0.18mm2 (#25AWG)
▲Shield Served ：Approx. 60/0.10A
▲Jacket
Ov. Dia. (mm) ：2.5(0.098")
Material：PVC
Colors：Black/Red/Yellow/Green/Blue

Physical display