Miếng Dán Chống Rỉ Bằng Thép Không Gỉ

Goods number: 009 Type of tape: Tape Color classification: 【Economic section 0.06mm thick】 48mm width x 20 m long 【Economic section 0.06 thick】 60mm width x 20 m long 【Economic section 0.06 thick】 100mm width x 20 m long 【Economic section 0.06 thick】 150mm width x 20 m long 【Standard 0.08mm thick】 48mm width x 20 m long 【Standard section 0.08 thick】 60mm width x 20 m long 【Standard section 0.08 thick】 80mm width x 20 m long 【Standard section 0.08 thick】 100mm width x 20 m long 【Standard section 0.08 thick】 150mm width x 20 m long 【0.1mm】 48mm width x 20 m long 【0.1】 60mm width x 20 m long 【0.1】 80mm width x 20 m long 【0.1】 100mm width x 20 m long 【0.1】 150mm width x 20 m long 【0.15mm】 48mm width x 20 m long 【Extraordinary thickness 0.15 thick】 60mm width x 20 m long 【Extraordinary thickness 0.15 thick】 80mm width x 20 m long 【Extraordinary thickness 0.15 thick】 100mm width x 20 m long 【Extraordinary thickness 0.15 thick】 150mm width x 20 m long 【0.14】 48mm width x 20 m long 【0.14】 60mm width x 20 m long 【0.14】 80mm width x 20 m long 【0.14】 100mm width x 20 m long 【0.14】 150mm width x 20 m long Production enterprises: Bengyuan da Add words at the end ———————————————— Notes for buyers ▲3、 cancelation of change orders is generally not supported after the goods are issued, if you need to cancel the order, please talk to contact customer service within 12 hours. ▲4、 【Order information】 Please confirm the name of the consignee when ordering、 is the telephone and address correct, there is no inconsistency between the name and identity card. If you have any other information, please talk about ▲6、 【Inspection standards】 For example: There is a thread in clothes, the eye is not opened (The general buttons on mainland new clothes were not cut open), screen chromatic difference (Photographing light and discrepancy on the computer screen on the phone can lead to a slight chromatic difference in receipt of goods and pictures), slightly offline, very few stains, there are also measurements with different 3-5 cm error, in fact, these international inspection standards are acceptable, none of them is defective