Mạch bảo vệ cell 3.2v HX-4s-F100a (Bản tiếng Anh)

Mạch bảo vệ sử dụng 10 mosfet bảo vệ 100a 12,4/14,8v Dòng xả liên tục 50A Dòng xả Max 100A Dòng bảo vệ 120A Tự động cắt điện ra khi điện áp trên cell bị tụt Xả cân bằng giữa các cell ***************************************************************** Description: 100% Brand New and High Quality This product is 4 string 12.8V LiFePo4 Lithium iron phosphate battery power protection board. With a balanced, same port 45A discharge. With heat sink. Protection board with overcharge protection, over discharge protection, over current protection, short circuit protection, temperature protection. Products with 10 MOS tube, powerful cooling aluminum, continuous current limit of 100A. Applicable to inverter, xenon lamp, solar street lights and other 4S battery pack. T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection, need to remove the solder joint next to the 0R resistance. Note: 3A current above the discharge products, the battery discharge rate to 3C or more. Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current. In the use of the battery will heat is Battery magnification is not applicable, this situation can not be long-term use, the battery will soon be damaged. Specifications: Discharge: Continuous Discharging Current: 100A Instantaneous Discharge Current: 120A Charge: Charging Voltage: 14.8V (Switching power 15-16V) Charging Current: 10A (MAX) Overcharge Protect: Over-charge Detect: 3.75±0.05V Protect Delay: 1300MS Over-charge Release: 3.60±0.05V Balance: Detect Voltage: 3.60±0.05V Release Voltage: 3.59±0.05V Balance Current: 65mA Over-discharge Protect: Over-discharge Detect: 2.1±0.08V Over-discharge Detect delay: 145S Release Voltage: 2.3±0.1V Over-current Protect: Detect Voltage: 200mV Detect Delay: 20mS Current Detect: 120±10A Release Condition: Cut Load Short-circuit Protect: Protect Condition: Cut Load (Not short connect) Detect Delay: 300uS Release Condition: Cut Load Inner Resistance: ≤20mΩ Self-Consumption: Working Current: ≤30uA Sleep Current (when Over-discharge): ≤20uA Working Temperature Range: -30+80℃ PCB Board Size: 7x6cm/2.76x2.36" Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Includes: 1 x BMS Protection Board for 12V 14.8V 4S 100A LiFePO4 Battery with Cable #Bms #Lifepo4 #100a #pin