PLASTIC BOX khuôn nặn đất sét dollhouse minifood hộp thức ăn

★ Mold size 　body: (Small) 11 × 19 × 4 mm (Large) 22 × 37 × 7 mm 　cover: (Small) 10 × 15 × 3 mm (Large) 21 × 30 × 5 mm ★ Amount of clay necessary for one motif 　Body: (small) 1g or less (large) 3g lid :( small) 1g or less (large) 2.5g can be used material: polymer clay, lightweight clay oven clay resin (It should be noted, does not mirror finish). unusable material: silicone material Material: Silicone rubber vendor: Nisshin Associates Co., Ltd. ■ Notes on using clay Measure the specified amount of clay and pack it in a mold to reduce burr processing. When filling with clay, put it in a concave shape (if you retract it), stick it to the side with your finger, etc., make the clay spread throughout the concave shape, and set the convex shape. If you roll the clay to the convex side first and set the concave shape, it is easy to make wrinkles on the side. ■ Cautions when using resin * In the case of a shape where air bubbles are likely to enter in the corner, paint the resin with a brush etc. on the part where air bubbles are likely to be accumulated first and then pour the resin into it. Polish with abrasives or spray with acrylic spray * UV resin has some things that can not use abrasives. Also, depending on the manufacturer, there is a UV resin / two-component mixed resin that is very easy to damage the mold.