Keo Dính Loctite 243 242 272 Keo Kỵ Khí Keo Siêu Sửa Chữa 401 415 495 638 Keo Giữ Linh Kiện Hình Trụ 640 641

Dear customer welcome to pay attention to our store If you have any questions please contact customer service. Customer service hours are from 9:00 am to 20:00 pm. We will also contact you as soon as possible at other times.

When we receive the order we will ship it as soon as possible please rest assured to place your order.

Welcome to wholesale order direct contact us we will give you a preferential price.

50ml is not a full bottle only half of the bottle about 72g (please allow 3-5g error)

-242(blue) typical use: low viscosity glue high strength suitable for bearing clearance fit repair worn hole and shaft fit.

-243(blue) typical use: for locking and sealing thread up to M20. Easy to disassemble and can be used on slightly oil-contaminated working surfaces.

-272(orange red) for typical use: Suitable for locking double head threads. Recommended for bolts up to 36mm in diameter. Heat and tools are required for disassembly.

-401: Universal medium viscosity used for porous acidic materials such as metals clinkers paper leather wood glass aluminum alloys.

-415: High viscosity strong impact resistance more suitable for metal bonding.

-495: General purpose used for plastic bonding can fill 0.1mm clearance.

-Loctite 601

Purpose: High strength low viscosity suitable for small clearance.

Viscosity: 100/150 (mpa) s)

Capacity: 50 ml

Color: Green

Maximum filling clearance (mm):0.1

Shear Strength (PSI):3700

Curing speed (25 ℃):24 hours

Relative density :1.1

A general purpose high strength holding adhesive with oil and other contaminants. Seals and holds the cylindrical part assembly with a maximum filling diameter clearance of 0.13mm. The initial curing within 30 minutes can prevent micro-vibration wear and crack corrosion between metal matches.

-Loctite 638

Features: high viscosity not easy to disassemble suitable for large clearance.

Viscosity (mpa) s) : 2500

Capacity: 50 ml

Color: Green

Maximum filling clearance (mm):0.127

Shear strength (PSI):3625

Speed (25 ° C):24 hours

Relative density :1.1

Typical use: It is suitable for fastening cylindrical parts with clearance below 0.38mm. It takes 5 minutes to solidify initially. It is suitable for fast-working occasions.

-Loctite 640

Features: Medium viscosity high temperature resistance.

Viscosity (mpa) s) : 600

Capacity: 50 ml

Color: Green

Maximum filling clearance (mm):0.178

Speed (25 ° C):24 hours

Relative density :1.1

Typical use: high temperature resistance up to 204 degrees Celsius suitable for high temperature operation.

-Loctite 641

Features: Medium viscosity easy to disassemble.

Viscosity (mpa) s) : 400/800

Capacity: 50 ml

Color: Yellow

Shear strength psi:940

Maximum filling clearance (mm):0.25

Speed (25 ° C):24 hours

Curing time: initial curing 20 minutes full curing 24 hours.

Relative density :1.07

Typical use: suitable for cylindrical fittings easy to remove.

Features: