KEBETEME 433MHz Cloning Door Remote Control Universal Gate Garage Opener Copy Remote Control Remote Cloning Duplicator

Instructions:

1. Clean code: two fingers hold the unlock key and the lock key at the same time; LED light flashes quickly 3 times in about 2 seconds; let one of the fingers (the other hand can not let go), and then use the free finger to quickly click three times on the free button until the LED light flashes quickly; Two fingers can let go; Then press any one key of the remote control; when the LED light turns off, it means the clear code is successful (all four keys are empty); If the light is still on after pressing any button on the remote control, it means that the source code has not been cleared successfully. You need to re-cleanup, and only a successful code cleanup can be a successful clone. You can re-clean and clone the code.

2. Copy: The left hand accepts the original remote control, the right hand accepts our cloned remote control, and keep the two remote controls as close as possible; Press the first keys of two remote controllers at the same time; in about 2 seconds, the LED light will flash quickly 2 times; After one second, the indicator light flashes and releases the fingers; And then press the button after learning successfully, the light keeps on, it means that the first key code on the original remote control has been copied to another remote control; The same method can be used when turning on the second key, the third key... If the copy is successful, the remote control function is the same as the original corresponding remote control.

3. Recovery: When you accidentally clear the copy of the remote control code, you can press the copy of the remote control of the bottom two keys at the same time, the LED lights will flash quickly, release after pressing any button, the light is long, this indicates that the code for remote control restored. Before using our remote control, please remember to remove the existing code from the remote control.

How to deal with the situation when some keys can control, the rest can't control

You can use clean and restore operation, the specific operation is:

1. Clear code;

2. After cleaning the code, copy the failed key again, and there is no need to copy the rest of the buttons;

3. Clear the code again;

4. Restore the code; At this time, the original keys that were not successfully copied are now covered by the new codes, and the original keys that were successfully copied are now saved. If there is NO copy after the second copy of the keys, repeat the above steps again and again until all keys have been successfully copied.

Peculiarities:

Better range, more durable and longer battery life.

Transmission and low battery LED indicator, visual feedback and operation mode indication.

Comes with a buckle for easy carrying.

Application: automotive central locking systems, garage doors, electronic doors, car sunroofs, heating systems, etc.

Remote control ONLY, other accessories demo in the picture is not included!

Tips:

1. Select the remote control: the original remote control function is normal, the remote control chip is the same or compatible, the remote control frequency is the same.

2. The remote control can only copy the fixed code, learn the code chip and the remote control part with a single chip (can copy the chip model, see copy chip type).

3. Double-sided remote control, rolling code remote control, single chip encryption program, the remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.

4. Before copying the remote control, make sure the existing code on the remote control has been cleared and check that the code is cleared successfully. Otherwise, it cannot be copied.

5. Please make sure your remote control has enough power, the distance between two remote controls is better.

6. If the copy distance is too close to the switch at different angles for copying. Press and hold the button on the original remote control to send the signal completely normal, and then press the button on the remote control to ensure that the function is completely copied.

Specification:

Type: remote control

Color: Black/White/Red/Green/Blue/Yellow (All in stock, please leave a message in your order which color you like)

Channel: 4

Frequency: 433MHz

Rated voltage: 12V

Rated current: 10mA

Package includes:

1 x remote control (with battery)