KEBETEME 315MHz / 433MHz Wireless Remote Control 4 keys Duplicator Frequency Auto Copy Keyless Remote Controller For Garage Door Gate Door

Features:

One to one key copy.

Each key password alone saves.

Can continuous repetitive copy use one million times

Privacy is strong.

Power on/off switch.

Copy chip remote: 2262, 2260, 1527, 2240, 3526, 5026, 527, 918, 6010, 6014, etc.

Uses garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products.

Please note this does not copy rolling code.

Feature：

Versatile and multivariate, simple design, personalized and easy to use and quick to use.

This smart copy remote control is suitable for electric door remote control, telescopic door remote control, garage door remote control.

Clone Chip Type:

2260(PT2260,sc2260,lx2260,hx2260); 2262,(PT2262,SC2262,lxe262,hs2262,hs2262),pt2264,PT2240(lx2240),1527(EV1527,hs1527,hx1527),FP527,cs5211,smc918,smc926 ,AX5326-3,AX5326-4,ht600,ht680,ht6207,ht6010,ht6012,ht6013,ht6014,ht12d,ht46f49e,pic16f629,pic16f630 and so on, different chip manufacturers have different prefix chip models as long as where the digital part of the chip can be the same model

Note: We usually do not recommend copying rolling code chips because there is a lot of uncertainty when copying rolling code chips. When copying the rolling code chip remote control, it cannot verify whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.

How to clean the code:

1. Press the unlock button and lock button at the same time. (Some shells are up and down buttons)

2. After the LED indicator flashes three times, release one of the buttons while the other is pressed and hold, then press the released button three times, the LED indicator enters a fast flashing state.

3.At this time, all the memory data will be cleared, the cleaned remote control will have no LED indicator no matter what button you press.

Copy method:

One hand holds the original remote control while the other holds the remote control. (A good situation is to put two remote controls on the desktop side-by-side with zero distance) respectively press the copy button, when the LED indicator flashes quickly after flash three times, this copy is successful. Other important functions are the same. Some remote controls have smaller transmit power, so the original remote control should be placed behind it to copy the remote control to use. For the presence of noise, interference should be avoided, if the copy is unsuccessful, it should be re-copy after clearing the code.

Package Included

1 x Remote control (with battery)

Note: This item comes without a retail box, but please rest assured that we will pack it well before shipping!