Handheld 0-30m/s / -10°C-45°C Air Speed Tester Auto / Manual Power off Wind Speed Meter for Flying Kite Wind Speed

1. Wind speed & temperature measurement.
2. Wind chill indication.
3. Temperature display in Celsius or Fahrenheit.
4. Different wind speed measurement unit including m/s, Ft/min, Knots, km/h, Mph.
5. Measure wind speed in: Current/Average/ Max.

Specification:

Features:
1.Wind speed & temperature measurement.
2. Wind chill indication.
3. Temperature display in Celsius or Fahrenheit.
4. Different wind speed measurement unit includingm/s, Ft/min, Knots, km/h, Mph.
5. Measure wind speed in: Current/Average/ Max.
6. Low battery warning.
7. LCD backlight .
8. Auto / Manual power off.

Wind Speed Measuring0.3~45m/s
Wind Speed Accuracy±5%
Wind Speed Unitsm/s,Ft/min,Knots,km/h,Mph
Current/Average Measuringyes
Temperature Measuring Range-10°C~45°C
Temp. Resolution0.2℃
℃/℉ Selection---
Backlight Displayyes
Low Battery Indication---
Data Hold Functionyes
Resolution0.1m/s
Max & Min MeasuringMax only
Range Bar Graphyes
Wind chill indicaton yes
Auto/Manual Power Offyes
PowerCR2032 3.0V (not included)
Product Net Weight / Size 58g /110*43*21mm
Packing Contents:1pc anemometer,1pc user's manual,1pc blister package
Operation Guide:
1. Put battery into battery compartment, LCD will blink all display for a second.2. Recover battery door, push" MODE "in 1s to turn on the unit. LCD will display wind speed, temperature & battery icon. LCD backlight will lasting for12s.3. Setting different wind measurement: Push "MODE"for 3 seconds until"m/s" starts to blink. Push" SET "to select desired measurement unit.To confirmthe desiredmeasurement unit by push" MODE ". Digit symbol:m/s meterper second; km/hr kilometer per hour; ft/min feet per minute; knots nautical mile mph mileper hour; Cu Current wind speed, MAX max wind speed, average windspeed.4. ℃/℉ switch option:Press the little conceal key on the rear cabinet to select different temperature unit5. Press any key will active LCD backlight for 12 seconds.6. Measurement: when the wind vane ( impeller ) turns, LCD will instant display wind speed and temperature. When temperature below 0℃,wind chill symbol will shown on the LCD.7. Push MODE+SET to turn off the unit.8. Build in 14 mins auto off Remark: Temperature switch key ( ℃/℉) conceal in the rear cabinet, pls use a little pushpin to press the key for ℃/℉ conversion.
Wind speed / temperature measurement range:
UnitRangeResolutionAccuracy
℃-10℃~+45℃0.2±2℃
℉14℉~113℉0.36±3.6℉
Current consumptionAbout 3mA
Weight 52g (including batteryWeightand langyard)
Battery 9V Battery (not inlcude )
Wind speed range
UnitRangeResolutionThresholdAccuracy
m/s0~450.10.1±5%
Ft/min0~58601939
Knots0~550.20.1
Km/h0~900.30.3
Mph0~650.20.2
The operating environment:
ThermometerNTC thermometer
Operating humidity≤90% RH
Operating temperature-10℃~+45℃(-14℉~113℉)
Store temperature-40℃~+60℃(-40℉~140℉)