foreverlily Mini Air Compressor Kit 130/150/170Kpa Air-Brush Paint 0.3mm Spray Airbrush For Nail Art Tattoo Craft Cake Nano Mist Sprayer

Specification

Item type: Airbrush Kit

Material: ABS 、PC

Voltage: 5V1A

Power: 8W

Product Type: Single Action

Air Pressure: 130/150/170Kpa

Battery Capacity: 900mAh

Charging Time: 1.5-2.5H

Using Time: 30-60min

Nozzle diameter: 0.3mm

Atomization flow：About 0.012mm

Product Include

1* Main machine

1* Spray G*un

3* Water tank

1* Metal nozzle

1* Nozzle plug

2 sets* Cleaning brush

1* Dropper

1* Air tube

1* Type-C cable

1* Manual

1* Box

Features

1. Airbrush Kit. DIY your painting more simple and delicate. Suitable for a variety of applications including nail art, facial moisturizing and makeup, cake and cookie decoration, hairdressing services, model painting, handicrafts and more.
2. Deep nourishment. Say goodbye to the surface hydration, direct to the skin, and give you hydrated skin.
3. Wide operating range. It can connect the air tube, paint the model, spray the creation, flexibility, can move in a larger range.
4. Improve work efficiency. It is convenient for you to work in different workplaces, without relying on power outlets, better meeting work needs.
5. Make your life more colorful. You can use it to color anything you want! Create artwork
6. Different gear, spraying effect is not the same. 1 gear: Suitable for makeup, nail design. 2 gear: Suitable for models, shoes, cakes. 3 gear: Suitable for large area use.
7. Cordless operation. You can use it anywhere without worrying about running out of power. Battery capacity 900mAh, charging time 1.5-2.5 hour, continuous use of 30-60 minutes.

Caution

1. Note: water-soluble solution can be used, not oil-based solution.
2. Do not use the product when charging it.
3. To avoid bacterial pollution, it is recommended to clean the product with warm water or alcohol before use.
4. Do not add any cosmetics other than liquid ones. High-concentration product must be diluted with mineral water.
5. To avoid nozzle clogging, every time you finish spraying you should: ①pour out the remaining liquid in the tank; ②add clean water and spray it (until there’s no spray coming out); ③spray air to completely dry the tank.

Operation

1.Open the lid

2.Add liquid

3.Short press to turn on and adjust the gear

4.Loosen the control knob to adjust mist amount (if needed)

5.Push the adjustment valve of the spray G*un back to spray out the mist

HOW TO CLEAN

1. Add airbrush cleaning solution.

2. Block nozzle and pull back trigger.

3. Spray out liquid.

4. Detach the rear.

5. Loosen the screw.

6. Gently rotate and pull out the needle.

7. Wipe the needle clean.

8. Reassemble the spray G*un.