FocusAi Sensor Body Motion Detector 5.8GHz Adjustable Embedded Microwave Radar Light Switch for Corridor Sensor

A product overview:

When someone walks into the sensor and meets the lighting requirement, the microwave switch is automatically turned on, the load electrical appliance starts to work, and the delay system is activated. As long as the human body does not leave the induction area, the load electrical appliance will continue to work. When the human body leaves the induction area, the sensor starts to calculate the delay, and when the delay ends, the sensor switch is automatically turned off, and the load electrical appliance stops working. Truly, safe, convenient and intelligent, energy saving.

Two product features:

1. The induction is sensitive, and the movement of living and non-living bodies can be accurately identified, so that the error rate is minimized.

2. Strong anti-interference: using 5.8GHz operating frequency, it is less affected by external natural factors, and the performance is stable and reliable.

3. Automatic metering: Automatically identify the intensity of ambient light, meet the lighting requirements and light up when there are people. Otherwise it does not light up.

4. Fully automatic induction: automatically turn on the lights after sensing people, turn on the lights when people come, and turn off the lights when people leave, safe and power-saving, free from external influences such as sound and objects.

Three technical parameters:

Working voltage: AC85-250V

Standby power consumption: 0.07W

Transmit power: <10mA

Operating frequency: 5.8GHz

Induction distance: 4-16 meters (adjustable)

Working delay: adjustable from 10 seconds to 30 minutes

Light control illumination: daytime-10-500LUX adjustable

Load power: 800W (resistive load) 200W (capacitive load)

Four notes:

1. Please disconnect the power supply before installation to avoid danger

2. The product is not waterproof, please pay attention to moisture-proof and waterproof.

3. The microwave induction angle is 360 degrees, please pay attention to the installation method.

4. Non-professionals are not allowed to disassemble and assemble the high voltage inside the product, otherwise the consequences will be at your own risk

Packing List:

1*5.8G Embedded Ceiling Microwave Radar Sensor Switch