ANENG 870 red Digital Multimeter19999 counts Backlight AC/DC Ammeter Voltmeter Ohm Alligator clip jumper wire test lead
Features
A. Introduction
This product is a battery-powered, true-rms, auto-ranging digital multimeter with a 19999 LCD display and a backlight.
B. Safety Information
To avoid possible electrical shock, fire, or personal injury, please read all safety information before you use the product.
(1) Do NOT exceed the "maximum value" indicated in the Specification.
(2) Examine the connection of the test leads and the insulation of the product before measuring voltage higher than 36V DC or 25V AC.
(3) Disconnect the test leads from the circuit before changing the mode.
(4) Misuse of mode or range can lead to hazards, be cautious. "OL" will be shown on the display when the input is out of range.
Specifications
Brand Name ANENG Model AN870 Display(LCD) 19999counts Ranging Auto/Manual Meterial ABS Update Rate 3Time/Second Ture RMS yes Back Light yes Date Hold yes Relative Measurement yes MAX/MIN yes Low Battery Alect yes Auto Power Off yes Diode yes Continuity yes NCV yes
Function Range Accuracy DC Voltage 19.999mV/199.99mV/1.9999V/19.999V/199.99V/1000V ±(0.05%+ 3) AC Voltage 19.999mV/199.99mV/1.9999V/19.999V/199.99V/750V ±(0.3%+ 3) DC Current 1.9999A /19.999A / 19.999mA /199.99mA /99.99μA /1999.9μA ±(0.5%+3) AC Current 1.9999A /19.999A / 19.999mA /199.99mA /99.99μA /1999.9μA ±(0.8%+3) Resistance 199.99Ω ±(0.5%+3) 1.9999kΩ/19.999kΩ/199.99kΩ ±(0.2%+3) 1.9999MΩ/19.999MΩ ±(1.0%+3) 199.99MΩ ±(5.0%+5) Capacitance 9.999nF ±(5.0%+20) 99.99nF/999.9nF/9.999uF/99.99uF/999.9uF ±(2.0%+5) 9.999mF ±(5.0%+5) Frequency 99.99Hz/ 999.9Hz/ 9.999kHz/ 99.99kHz/ 999.9kHz/ 9.999MHz ±(1.0%+2) Duty Cycle 1%~99% ±(1.0%+2)
Packaging
1* Multimeter
1* Combination line(Pro only)
1* Instruction manual
1* Standard wiring
1* Temperature measurement line
Warning:
1. Do NOT exceed the "maximum value" indicated in the Specification;
2. Do NOT input voltage at the Current Mode, the Resistance Mode, the Diode Mode, the Continuity Mode, or the Temperature Mode;
3. Do NOT use the product when the batteries or the battery cover is not placed properly;
4. Turn off the product and remove the test leads from the test points before changing batteries or fuses.