DIPPRUN 3.2V3.7V Light-controlled Radar Induction Human Body Solar Lamp Circuit Board With Remote Control

Product selling point:
1. Using high-quality materials, the quality is guaranteed
2. Stable performance
3. Easy to use
4. Small and beautiful
5. Wide range of applications

parameter:
Rated voltage: 3.2V/3.7V
No overcharge and overdischarge protection requires the battery to have its own protection board
Solar panel input power: <6V
LED power: <10W (virtual standard 60w on the market)
Induction method: microwave radar induction
Sensing distance: about 5-10 meters
Induction time: After 15 seconds of high brightness, it will turn to dim light (do not turn off the switch when charging by sunlight. The switch should be in the normal open state)

Test Notes
1. When testing the induction mode, there should be no moving objects within 12 meters around, including the movement of hands and feet, otherwise it will be detected
2. When multiple sensing modules are together, mutual interference will occur, resulting in insensitive sensing, or false triggering will occur
3. The surface of the patch part is the emitting surface, and it is not allowed to stick stickers and glue on this side, otherwise the sensing distance will be shortened
4. The distance between the front and back of the sensor is not less than 2CM from the metal
5. The surface of the patch part must not be covered by metal, otherwise the detection signal will not be emitted and the sensing distance will be shortened
6. The induction signal can penetrate glass and plastic walls, etc. 3.2V/ 3.7V Solar Street Light Circuit Board

Package list:
module*1
Remote control*1