DC 12V ESP8285 WiFi Wireless Switch Cycle Time Timer Delay Relay Module For IOS Smart Home For Android App Replace ESP8266

1, the module diagram is as follows:

2, module pairing method:

1 Connect your mobile phone to the wifi network, download and open the “easy micro-link” APP (Baidu can search).

2 Connect the +12V DC power supply to the module power input. Press and hold the button on the module (about seven seconds or more) until the red indicator on the module flashes quickly.

3 In the “Easy Micro-Link” APP, complete the pairing as follows.

3, the module usage:

After the module pairing is completed, your newly paired module will appear on the main interface of the app.

In the default setting "OFF" switch state, the relay terminals L and K0 are turned on, and L and K1 are not turned on;

In the default setting of "ON" switch state, relay terminals L and K0 are not conducting, and L and K1 are turned on.

2 Click the device to enter the device page to set the settings such as “Timer”, “Delay” and “Cycle Time”.

3 In the upper right corner of the device page, you can perform operations such as “Device Settings”, “Delete Device”, etc. Under “Device Settings”, you can perform firmware upgrades on your device and modify the power-on status.

Wifi Working Frequency:2.4G 802.11 b/g/n

Control Mode:By App

Transportation Mode:Wifi
System: For Android/ for IOS

Package Including:

1* self-lock Smart WiFi Wireless Switch Relay Module DC 12V by APP Control