🌈In Stock🌈Hydrogen Generator Water Bottle PEM Technology, SPE Ion Membrane Hydrogen-Rich Water Cup, Negative Ion Health Cup, Hydrogen And Oxygen Separation Electrolysis Water Cup USB Charger

Five points:

[Three minutes of high-speed electrolysis]: using platinum titanium electrode sheets, with PEM technology, the hydrogen content of 1300ppb after 3 minutes of electrolysis; the hydrogen content of up to 1470ppb after 10 minutes of electrolysis.

[Common cold and hot water]: It is recommended that cold and hot water below 122°F (50°C) be suitable for purified water/mineral water/boiled water/distilled water; high-concentration hydrogen production, non-toxic and tasteless, five cups of hydrogen water per day, so that young people can stay .

[Large-capacity one-key electrolysis]: Platinum titanium electrolysis ring, large-capacity lithium battery, corrosion resistance, long life, energy saving and no secondary pollution

[Intelligent LDE display]: It can display the battery power, press and hold for 3 seconds to turn on the power, you can choose 3/6min electrolysis, and each stage of electrolysis can display the hydrogen content.

[Gift Nano Spray Water Replenisher]: Blue light spray treats the skin, one-button control of the concentration of hydrogen; the water replenisher can only use electrolyzed hydrogen. It is used to restore the body's health, slow down wrinkles, improve the intestines and stomach, promote metabolism, and enhance immunity.

[Absorbable hydrogen]: Comes with a hydrogen absorption tube, which can quickly absorb hydrogen after electrolysis, which is helpful for health preservation.

Big description:

Bottle material: high-density glass

Lid material: high hardness aluminum alloy

Electrode material: platinum titanium + SPE ion membrane

Electrolysis light: colorful light effect

Hydrogen concentration: 1200ppb-1400+ppb

Potential value: -650-0mv

Hydrogen concentration: electrolysis once, can reach 1000ppb-1200ppb

Multiple electrolysis, can reach 1200ppb-1400ppb

Electrolyzed water temperature: recommended below 122°F (50°C)

Charging time of hydrogen suction cup: 1-2H

Charging time of the sprayer: 0.5-1H (about 1H when fully charged)

Number of electrolysis: 15 times (under full power)

Cup lid color: gold/silver

Style: Z model

Capacity: 400ml

Display: LDE smart screen

Size: 68mm*68mm*245mm

Steps:

Step 1: Short touch the power button, the screen will display power. Touch the button for 2 seconds, the light will light up, and the bottle will start working for 3 minutes

Step 2: Electrolysis mode

1. Press the button for 2 seconds, the LED light is on, and the screen displays the working mode for 3 minutes;

2. Press the button for 2 seconds, the LED light will be on, the screen will display the working mode for 3 minutes, press the button again soon, the screen will display the working mode for 6 minutes;

3. Hydrogen content display: 500ppb after working for 1 minute, 1000ppb after working for 2 minutes, 1300ppb after working for 3 minutes, and 1400ppb after working for 6 minutes. 200ppb range).

Step 3: After the electrolysis process is completed, the bottom of the bottle will beep and the screen will stop flashing.

Step 4: If you need to stop working halfway, please press the switch button. The LED light will go out and the bottle will stop electrolyzing.

Maintenance and precautions:

1. Please charge correctly, turn off the charger when the power is full.

2. Please put the bottle in a dry place without sunlight.

3. Keep the bottle away from the fire. Do not heat in a microwave oven, electric kettle, electric cooker, thermos, etc.

4. Do not use volatile solvents such as detergent to clean the glass wall of the bottle.

5. Except for drinking water, do not put drinks in bottles.

6. Do not dismantle the structure without professionals.

7. If you find that the bubbles become less after working for a period of time. The bottom may be impurities after electrolysis. Put the vinegar into the base, pour the vinegar for about 2 hours, and then wash it with drinking water

8. If the bottle is dry and there is no water in it, do not turn it on/off. This operation can easily damage the base and cannot work.

9. If the bottle cannot work after opening/closing, the bottle cannot work. Please charge the bottle and wait at least 5 minutes.

10. The quality of the water source must be drinking water/pure water/mineral water/boiled water/distilled water

packing list:

Smart LED Hydrogen Suction Cup Type Z*1

Nano beauty spray moisturizer *1

Hydrogen suction tube*1

Mineral water hydrogen absorption adapter*1

USB charging cable*1

Exquisite gift box*1

English manual*1