Chinatera LED Jellyfish Lamp Color Changing Simulation Jellyfish Aquarium Tank Night Light Fantasy Mood Light Table Lamp for Home Bedroom Office Decor

Specification:
Product material: Plastic + acrylic
Product size / weight: (optional)
M: 10.5x10.5x30cm/0.52kg
S: 7.0x7.0x23cm/0.38kg
Packing: 1PC/color box
Remarks: 3 X AA batteries (not included) + USB cable (included)
Type(optional): A Medium Jellyfish Light, B Small Jellyfish Light, C Small Fish Light

Medium instruction(optional):
1. Use 5V for plug
2. Pour half of the clean water into the aquarium before use, shake it a few times, and pour it out to clean the aquarium's impurities.
3. Plug in the USB cable and pour clean water again. The surface of the water is about one centimeter away from the mouth of the bottle. Add 3-6 drops of detergent into the water.
4. After smoothing the tentacles of the jellyfish, put it in the water and cover the lid. Just turn on the switch.
Tip:
When used for the first time, a lot of bubbles will adhere to the surface of the jellyfish, which may cause the jellyfish to not float smoothly.
After a period of time, the jellyfish will swim normally after the bubbles disappear, or the bubbles on the surface of the jellyfish can be manually removed.

Small instruction(optional):
1. Take out the product and open the water tank cover, add water to the water tank and fill it up without overflowing;
2. Put red and white volcanic beads on the top of the product, that is, the water tank cover;
3. Remove the battery cover and install 3 AA batteries;
4. Press the "power switch" ON/OFF button on the back of the product to turn the power on/off;
5. Press the "Product Switch" on the front of the product again, the light will turn on, and the volcanic beads will appear repeatedly;
6. The product can use a transformer (output DC4.5V, 500mA transformer, transformer is not included, you need to buy it yourself).

Cleaning and maintenance:
1. When not in use for a long time:
a. Please cut off the power: take out the battery or unplug the external power plug.
b. After drying, put it in the original box.
2. Cleaning: Before cleaning, be sure to cut off the power supply. Just wipe with a soft cloth when cleaning. Do not wash the whole product in water!

Operation manual:
1. Load 3*AA battery or connect the power with USB wire. (Choose one way only, discharge the battery if you use USB wire)
2. Put clear water inside the tank.(95% full is enough)
3. Turn on switch on the base of the lamp.
4. Add 3 drops of detergent into water and wait for about 1 minute to release the bubble from the tank.
5. Dip the 2 jellyfish into water then they will float up and down(If there are some bubble under the head of jellyfish,use a stick to turn it over to release the bubble,or the jellyfish will keep floating on top).

Note:
Do not keep the lamp working more than 8 hours each day to save the life of motor.
Change the water after about 2 weeks because the water may gone dirty.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.