Mini Air Mouse Bàn Phím Không Dây Chuột Bộ Cho Máy Tính Tv Box Điều Khiển Từ Xa 2.4g Chuột Bay Combo Chuột Chìa Khóa Nhỏ Gọn

Please contact customer service if you need Chinese instructions, thank you!

Type A code matching and calibration

code matching method

if the flying mouse is insensitive or does not respond, you can use the following method to correct the code. WARNING: This operation may damage the original matching method. Please use it with caution in non-special circumstances.

1) insert the USB receiver into the host and keep within 10cm from the handle

2) press and hold the VOL-key and the key in the middle of the OK lower square for 2 seconds at the same time, the green light starts to flash quickly, and then release the key.

3) the green light stops flashing, and the long light indicates that the code is completed.

Note: If the operation is unsuccessful, restart the operation.

Mouse cursor calibration

this remote control has automatic calibration function, and manual calibration is used only when the automatic calibration is invalid.

Press and hold the right mouse button and the Home button for 3 seconds at the same time, and the indicator light starts to flash quickly.

Release the button before the flash ends and keep the handle stationary on the desktop.

The indicator light is always on, indicating that the calibration is completed.

Note: Keep the handle absolutely stationary on time. If there is Movable, the calibration data may be incorrect and need to be re-operated.

Type B code matching and calibration

since our product is a six-axis gyro, it falls from a high place in different environments. The camel mule instrument may have changed and then caused the drift of the mouse pointer. About this, please charge and correct it.

How to recalibrate:

answer: If the cursor is unstable, start Movable. Press the "OK" + "return" button for 3 seconds and place it on the horizontal surface until the pointer is stable and the surface is calibrated.

Matching:

1. Press the "volume +" and "Volume One" keys at the same time, and the blue LED will flash and enter the code matching mode.

2. Plug in the USB receiver, wait for about 3 seconds, the LED will stop flashing, and then the pairing is successful.

Cursor speed adjustment:

from slow to fast: press the "OK" and "Volume +" keys, the blue light flashes, and the cursor speed is faster.

From fast to slow: press the "OK" and "volume-" keys, the blue light flashes, and the speed of the cursor slows down.

Press fn once, the f1-f10 and punctuation marks will be locked, and press fn, it will be released.

Sleep and wake-up

in order to save electricity and prolong the service life of the battery, the remote control enters the sleep state after 20 seconds without any operation. Press any key during sleep to wake up the empty mouse.

Precautions.

1. Battery power: make sure that the battery power is sufficient. When the battery is low, the cursor stability will be affected.

2. Use distance: the actual use distance of this product will change due to the influence of electromagnetic field. Please make sure that the receiving end is not blocked by metal objects.