Autek Máy Quét IFIX501 OBD2 Công Cụ Kiểm Tra Đọc Mã Lỗi Rõ Ràng Cho Toyota Hyundai Ford Honda Máy Đọc Mã Ô Tô Chuyên Nghiệp EOBD Máy Phân Tích Động Cơ Chẩn Đoán Xe Dụng Cụ Chẩn Đoán Xe Hơi OBD 2 Cho Tất Cả Các Loại Xe Hơi Thông Dụng

 

 

 

Basic Introduction

Autek IFIX501 supports full OBD2 basic functions for engine, like:Diagnose and clear fault codes/Data waveform display/real-time data stream/I/M emission detection data and so on .and Autek IFIX501 almost supports working on all vehicles with OBD2 protocol. With 2.8-inch color LCD display, it has full functions, low price and high cost performance.

 

 

 

 

 

 

 

Autek IFIX501 OBD2 Scanner Functions

 

1. I / M Readiness technology for quick viewing of system monitors

Read I / M readiness for a quick view of the system status monitors in order for the vehicle to check the status of emissions compliance

2. Erase codes

Transparent detected fault codes and turn off check engine light effectively

3. Reading the error code

Read extensive current until and permanent codes in OBD 2 system quickly

4. data stream

Real-time graphical view of vehicle extractions computer module (s) for easy analysis

5. Freezing system

Type of vehicle movement, operating parameters at the moment DTC will be detected

6. Vehicle information

Get vehicle information VIN, sins and CVNs in full

 

 

 

 

 

 

 

Main Functions:

• Diagnose and clear car fault codes
• Data waveform display,real-time data stream
• I/M emission detection data;
• 2.8-inch color LCD display
• High reliability,wide supply voltage range of 8~36V,
• with stronger overcurrent and overvoltage rotection
• The engine's round per minute(RPM)
• Computed load value
• Cooling fluid temperature
• Data Print
• Data Playback
• The state of the fuel system
• Speed of the vehicle
• Short-term fuel situation
• Long-term fuel situation
• Pressure of intake manifold
• Time ahead of oil injection
• Intake temperature
• Air velocity
• Absolute position of throttle valve
• Oxygen detection voltage assc
• with short-term fuel state
• The state of the fuel system
• Fuel pressure
• Monitoring of fuel consumption,etc

 

 

 

 

 

 

Support For Cars

 

1.American Car : from 2000 - now

• for Chrysler , for Ford, for GM, For Jeep , for lincoln ,for Buick ,
• for Cadillac ,for Chevrolet , for Dodge , for HM...
   

2.European Car : from 2004 - now

• for BENZ ,for SMART , for SPRINTER , for BMW ,for VW ,for SKODA ,
• for AUDI ,for OPEL, for Lamborghini , for PORSCHE, for Maybach,
• for Euro Ford , for LANDROVER , for Jaguar , for ASTONMARTIN ,
• for Bentley , for Rolls-Royce , for ROVER , for MINI , for VAUXHALL ,
• for DR , for FERRARI ,for FIAT ,for Abarth ,for LANCIA ,for Alfa Romeo ,
• for Maserati ,for BUGATTI ,for PEUGEOT ,for CITROEN ,for RENAULT ,
• for SAAB , for VOLVO , for OPEL，for GM，for GMSA , for Dacia , 
• for SEAT..
   

3.Japanese/Korean Car: from 2007 - now

• for HONDA ，for Acura ,for TOYOTA ,for SCION ，for LEXUS ，
• for MAZDA , for NISSAN ，for Infiniti ， for JPISUZU，ISUZU ，
• for TLISUZU for DAIHATSU , for SUZUKI , for MITSUBISHI ,
• for SUBARU for SAMSUNG , for DAEWOO ,for SSANGYONG , for HYUNDAI ,
• for KIA...
   

4.Chinese Car:from 2009 to now

• for GREAT WALL, for HUACHEN, for GEELY, for DFHONDA, for LIFAN...
   

5.Russian Car: from 2012 to now

• for GAZ, for VAZ ,for LADA, for IZH, for PAZ,for SeAZ ,for UAZ, 
• for ZAZ...

 

NOTE: 

• Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.And this device only have OBD2 Functions,don't have Special Functions,Like ABS Reset,Airbag Reset...
• Please Leave us message in below format, we will reply you within 8 hours.   
• for example : xx, 2005, 2.0cc, Diesel