Aideepen Bộ Chuyển Đổi Tăng Áp Biến Tần 150W Bảng Mô-đun Tăng Áp Biến Tần DC 12V/24V Sang 110V 220V

Product parameters:

High frequency AC output port: Suit for resistive loads, such as ordinary household incandescent bulbs (tungsten filament bulbs), ordinary electric soldering irons, or connected to voltage doubling rectifier circuits. Do not measure this output port when measuring the output voltage, because these voltmeters are designed to measure 50Hz household voltage, not high-frequency voltage, which will cause huge measurement errors.

DC output port:

The multimeter can be used to measure the voltage in DC gear, and it can be equipped with switching power supply loads (the electrical appliances marked with the input voltage of AC100-240V ), resistive loads. Power conversion circuit board of 150W inverter battery DC12V step-up transformer AC220V step-up transformer.

Switch: the red line and black line on the board are switches to control whether the high-voltage output is available.

Input voltage:

12V, low limit input voltage: 8V, high limit input voltage: 14.8V. Please add a fuse. It is recommended to add a 15A fuse (lithium battery power supply and switching power supply, DC power supply, which will lead to overheating and burning of the pipe when the power supply is insufficient). The output voltage is not stabilized. The input power (current) should be sufficient, otherwise the pipe is easy to burn.

Output voltage: 110V 200V 220V 280V

Output waveform: high-frequency square wave or DC (unfiltered)

Output power: 150W (please add fan for heat dissipation above 100W)

No load 12V terminal current: 250mA

Operating frequency: 27KHZ

Protection: no protection, please add your own fuse

Attention:

Applicant area: switching power supply type loads. Generally, electrical appliances with input voltage of 100-240V can be used, such as non counterfeit mobile phone chargers, set-top boxes, DVDs, LED lights (some are driven by constant current, so some can be used, and some LED lights cannot be used. When using, they can only be connected to the DC output port, and must not be connected to the high-frequency AC output port), ordinary tungsten filament bulbs, small electric drills, energy-saving lights, LCD TV is connected to DC output port, etc.

Package include:

Inverter X1