5PCs/15pcs 3P chuyển mạch Dip ba vị trí phẳng chuyển mạch Dip Dip cấp/địa chỉ chuyển đổi

3P DIP Switch Three-position Flat Dial Switch DIP Flat/Address Switch Straight pin pitch 2.54mm

Electrical life: tested under voltage 24VDC and current 25mA, it can be dialed back and forth 2000 times
Contact impedance: the initial value is limited to 50mΩ; after the test, the maximum value is 100mΩ
Insulation resistance: limited to 100MΩ, DC 500V
Compressive strength: 500V AC/1 minute
Interpolar capacitance: up to 5pF
Circuit: single contact single selection
Operating force: maximum 0.2kgf
Push button stroke: 2.0mm
Operating temperature: -20°C*+70°c
Storage temperature: -40°C~+85°c
Rated current that the switch does not frequently switch: 100mA, withstand voltage 50V DC
Rated current that the switch frequently switches: 25mA, withstand voltage 24VDC

Toggle switch is to turn on or off the circuit by dialing the switch handle, so as to achieve the purpose of switching the circuit. It has the characteristics of flexible slide movement and stable and reliable performance. The toggle switch is mainly used for:
Various instruments and equipment, various electric toys, fax machines, audio equipment, medical equipment, beauty equipment and other electronic products. The product quality is good, and it is the first choice in everyone's daily life!

During all operations, make sure that the switch is in the "OFF" position.
Wave soldering: It is recommended that the soldering temperature be at 240℃ for 20 seconds.
Hand soldering: Use a 30-watt soldering iron, the temperature is controlled at 270℃, and the soldering time is about 2 seconds
Cleaning process: When using steam, the temperature should not exceed 51℃