5 Cái Đầu Nối Khí Nén Hình Chữ T 4Mm 6Mm 8Mm 10Mm 12Mm 14Mm 16Mm 3 Chiều OD Đầu Nối Ống Ống Khí Phụ Kiện Nhanh

Description

Pneumatic fittings PU 10mm 8mm 6mm 12mm 4mm air water Hose Tube One Touch Straight push-in Fittings Plastic Quick Connector tube
Tube Plastic Quick Connector Fittings
Fit For Tube Size：4mm 6mm 8mm 10mm 12mmHose Tube
Operating Pressure: 0~1Mpa
Operating Temperature Range: 0~60℃
Fluid Type：Air / Vacuum
Fit For Tube Material：PU/PE/Nylon ,Polyurethane
Quick Fitting Material: Plastic
Packing include:
5 pcs x Pneumatic Tee Connector
Features:
1. Quick installation, simple and smart, saves space.
2. Various forms to meet the needs of any pneumatic pipe.
3. Even after installation, the plastic pipe body can be arbitrarily turned.
4.The button adopts an elliptical design, which makes the disassembly more labor-saving and convenient.

Precautions:
1. it may cause leakage or abnormal connection and disassembly due to the tolerance of the trachea. Therefore, it is necessary to check whether the outer diameter conforms to the tolerance allowable size.
2. Please check to see if the end face of the trachea is cut at right angles. If there is any damage or scratch outside the trachea, insert it into the end to ensure the seal.
3. When disassembling the air pipe, check that the pressure in the air pipe is zero.

Connection pipe precautions:
(1) Make sure that the cut surface of the pipe is vertical, there is no damage on the outer circumference of the pipe and the pipe is not oval.
(2) When inserting the pipe, it must be inserted into the bottom of the joint. If the pipe is not inserted, it may cause air leakage.
(3) After the pipe is installed, pull the pipe to confirm that the pipe cannot be pulled out.
Precautions when removing the joint:
(4) Use a suitable tool to remove the pipe joint using the outer hexagon of the pipe joint
(5) It is necessary to remove the sealing material adhered to the opposite side of the pipe joint. Otherwise the adhered sealing material may enter the peripheral components, causing malfunction

Use warning:
1. In the fluid other than air and water, try not to use
2. If it is used in a place where sparks are generated, it may cause a fire, so it is forbidden to use it in such a place.

Please Note:
The size is measured by hands, please allow minor error of measurement. Photo color might be a little different from the actual product due to color display of different monitors.