Model A
Features:
- Water Level: 0-100% (Level sensor: 0-190ohm/240-33ohm available)
- Holding Tank: 0-100%
- Voltmeter: 9-32V
- Alarm: Symbal flashing(When 2 or more faults occur, an item is reported every 3s.)
- Degree of Protection: IP67
- Backlight: TFT Screen
Model B
Features:
- Water Temperature: 40-120℃ (Temperature sensor: 301-22ohm)
- Water Level: 0-100% (Level sensor: 0-190ohm/240-33ohm available)
- Voltmeter: 9-32V
- Alarm: Symbal flashing(When 2 or more faults occur, an item is reported every 3s.)
- Degree of Protection: IP67
- Backlight: TFT Screen
Model C
Features:
- Water Temperature: 40-120℃ (Temperature sensor: 301-22ohm)
- Oil Pressure: 0-10 bar (Pressure sensor: 10-184ohm)
-Fuel Level: 0-100% (Press the back button to adjust the level signal: 0-190ohm/240-33ohm available.)
- Voltmeter: 9-32V
- Alarm: Symbal flashing(When 2 or more faults occur, an item is reported every 3s.)
- Degree of Protection: IP67
- Backlight: TFT Screen
Model D
Features:
- Water Temperature: 40-120℃ (Temperature sensor: 301-22ohm)
- Oil Pressure: 0-10 bar (Pressure sensor: 10-184ohm)
- Voltmeter: 9-32V
-Alarm: Symbal flashing(When 2 or more faults occur, an item is reported every 3s.)
- Degree of Protection: IP67
- Backlight: TFT Screen
Model E
Features:
- Water Temperature: 40-120℃ (Temperature sensor: 301-22ohm)
- Oil Pressure: 0-10 bar (Pressure sensor: 10-180ohm)
- Tachometer: 0-9999RPM
- Speed Ratio: 1-250; Step Value: 0.1
(Adjust Rate:Keep on pressing the button for 3 seconds, and then enter into setting mode, the value will increase when you press the button, when you leave the button and then press it again, the value will decrease, leave the button, the tachometers will autoclave your setup after 3 seconds.)
- Voltmeter: 9-32V
- Alarm: Symbal flashing(When 2 or more faults occur, an item is reported every 3s.)
- Degree of Protection: IP67
- Backlight: TFT Screen