2pcs PVC Decorate Stripe Car Decal Car Hood Stickers Creative Anti Scratch Stickers(Black)

• Style: Car body sticker

• Size: 80 x 12cm

• With Tools: No

• Number:  1 Pair

• Material: PVC

• Pattern: Stripe Pattern

• Color: Black / White / Yellow / Red/ Blue

• Feature:
  - Apply to any part of the car body.
  - Replace without leaving traces not reflective.
  - Extension is better, not easy to brittle broken, paste when can be clearly felt.
  - Material color correction, paste after feeling very firm, more have model, three years won't drop color.

• Installation Method:
    - The Installation Method of Small Car Stickers with Transparent Transfer Film (Dry Paste Method):
     1. Clean the body and keep it dry.
     2. Confirm the location that needs to be posted. In general, slowly stick on one side, scrape flat with tools, and expose the paper.
     3. If the graphics are not large enough, the transparent transfer film and stickers can be torn off and pasted. But care must be taken to avoid accidental adhesions.
     4. Paste well, then repeatedly scrape several times. Tear the transparent transfer film.
     5. in the car door and sewing with a knife knife, wrap it inside.
     6. do not let the car stickers and body have any separation or protuberance.
   - The Installation Method of Large Vehicle Stickers with Transparent Transfer Film (Wet Paste):
     Tools: Rag, sprinkler, scraper or credit card.
     1. Clean the car body and sprinkle water evenly on the parts to be affixed to the car body to reduce the sticker viscosity and adjust the position conveniently.
     2. Confirm the location that needs to be posted. Slowly stick on one side, gently scrape the flat with tools, and expose the paper.
     3. Encounter doorknobs or anti friction bar according to the situation to cut and open the material.
     4. Adjust properly, make sure the general position of the graph is correct, and then repeatedly scrape the water and bubbles. Tear the transparent transfer film.
     5. In the car door and sewing with a knife knife, wrap it inside.    6. Do not let the car stickers and body have any separation or protuberance.
     7. As far as possible, let the moisture in the car stickers be dry, and the conditions can be moderately heated and dried. According to the weather condition, wash the car after one or two days.
     In order to reduce the difficulty of customer installation, the stickers provided by us have been transferred to the transfer film in advance. (excluding block continuous graphics)

• Matters Needing Attention:
     - Don't wax the sticker a week before you decide to dress up your car. The film should not be applied when the car is hot. The car must be cleaned and put on the back one.
     - Do not wash your car within a week. It is recommended not to be exposed to the sun within 24 hours. Do not wash your car within three days after pasting. Do not paste on rainy days.
     - If the sticker needs to be pasted on the crack of the door or other places that need to be moved, don't worry, just cut it with a sharp knife after it is pasted.
     - If you really don't want to do anything, please go to the place where the solar membrane is put on and ask for help.

• How to clear:
     - Gently scrape the edges of the sticker with your fingernails and tear it off completely, leaving no marks or damage to the paint. In winter, if it is too cold to scrape the corners, a hair dryer can be used to tape the paper.
     - Heat it up properly, and it can be easily removed after melting.

• Note:
  - Please check the size measurement chart carefully before making payment.
  - Due to machinized cut，this product may have 1-2cm difference.
  - The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.

• Package Weight: 60.0 G / 2.12 Ounces

• Package Dimensions (L*W*H): 240*50*50 MM / 9.45*1.97*1.97 Inches

• Retail Packaging: No, No Packing