Gigabit Ethernet Switch
User’s Manual
1．Overview
IEEE802.3z/AB 10000Mbps 2 port Gigabit Ethernet Switches supports two types media for network connection and switching such as 100/1000/10000Base-T and 10000Base-SX/LX. The switch is designed with a switch controller and buffer memory that connects two types segments to operate smoothly. The Switch with 1 SFP+ port 10GBase-T/SX/LX and 1 RJ45 port 100/1000/10000 Base-T(selectable). The RJ45 port support Half or Full Duplex modes. All SFP ports support only 10000Mbps and Full-Duplex modes. With external power unit, it provides good stability and reliability.
2.Checklist
Before you installing the Switch, verify that the package contains the following：
1． The 2 port TP-SFP Gigabit Switch.
2． AC-DC Power Adapter.
3． This User’s Manual.
Please notify your sales representative immediately if any of the aforementioned items is missing or damaged.
3.LEDDescription
There are 6 LED At Front View of 2 port Gigabit Ethernet Switch.:
10G/1000M/100M | Lit when TP speed is 10G/1000M/100Mbps |
LINK | Lit when TP connection is good. Blinks when TP data is transmitting. |
SFP+ | Lit when SFPn connection is good or when SFPn data is transmitting. |
PWR | Lit when 5-12V power is coming up. |
n : 1-8
4.SFPModule Fiber OpticTechnical
Specifications
10G Base-SX | 1000Base-LX-20 | |
Connector type | LC | LC |
Fiber type | Multi-mode | Single-mode |
Wavelength | 850nm | 1310nm |
Max Distance | 62.5µm: 224m 50µm: 550m | 20Km |
Min TX PWR | -12.0dBm | -11.0dBm |
Max TX PWR | -6.0dBm | -5.0dBm |
Sensitivity | < -19dBm | < -22dBm |
Link Budget | 7.0dBm | 11.0dBm |
10GBase-LX-40 | 1000Base-LX-80 | |
Connector type | LC | LC |
Fiber type | Single-mode | Single-mode |
Wavelength | 1310/1550nm | 1550nm |
Max Distance | 40Km | 80Km |
Min TX PWR | -5.0/-10dBm | -3.0dBm |
Max TX PWR | 0dBm | 0dBm |
Sensitivity | < -25dBm | < -25dBm |
Link Budget | 20.0/15dBm | 22.0dBm |
Single FiberTechnicalspecification
10GBase-LX-20 | 1000Base-LX-40 | |
Connector type | LC | LC |
Fiber type | Single-mode | Single-mode |
Wavelength | 1310/1550nm | 1310/1550nm |
Max Distance | 20Km | 40Km |
Min TX PWR | -10.0dBm | -5.0/-10dBm |
Max TX PWR | -4.0dBm | 0dBm |
Sensitivity | < -22dBm | < -25dBm |
Link Budget | 12.0dBm | 20/15dBm |
10GBase-LX-60 | 1000Base-LX-80 | |
Connector type | LC/SC | LC/SC |
Fiber type | Single-mode | Single-mode |
Wavelength | 1490/1550nm | 1490/1550nm |
Max Distance | 60Km | 80Km |
Min TX PWR | -6.0dBm | -1dBm |
Max TX PWR | 0dBm | 3dBm |
Sensitivity | -25dBm | < -26dBm |
Link Budget | 19dBm | 25.0dBm |
5.InstallingtheGigabit Fiber Switch
1. Attach the SFP+ Module to SFP+ Cage on the Switch.
2. Attach fiber cable from the SFP on the Switch to the fiber network. The fiber connections must be matched: transmit socket to receive socket.
3. Attach a UTP cable from the TP network device to the RJ45 port on the Switch.
4. Connect the power adapter to the Switch and check that the Power LED lights up. The TP SPD, Act and SFP LEDs will light when all the cable connections satisfactory.
6.Technical Specifications
The Gigabit Ethernet Switch conforms to the following standards:
lStandards:IEEE 802.3z/AB 10/1001000Base-T
1000Base-SX/LX/ZX
lFiberCable:
10G SX: 50/125，62.5/125µm multi-mode
1000 LX/ZX: 8.7/125, 9/125µm single-mode.
lUTP Cable: Cat.5e or Cat.6 cable up to 100m.
(only 9 port switch)
lData Transfer Rate:
RJ45 port: 100M, 1000Mbps,10G
SFP: 1000Mbps,10G
lLED Indicators:
SFP+, LAN, Link/Act, PWR.
lDuplexModes: RJ45 port:NWay Full/Half
Duplex auto- negotiation
SFP: full-duplex mode
lPower Requirement:220V(100-260V)AC，50Hz
DC12/1A
lAmbient Temperature:0 ～ 50℃
lHumidity:5% ～ 90%
ldimensions：134mm*82mm*27mm（L*W*H）
.u2470.d20160617.t120723.jpg)
