1000W Inverter Booster Board DC12V 24V To AC110V 220V 330V 380V Sine Wave Modified Wave Single Silicon Machine Pre-Stage Circuit Board

 

For this module, we don't have the technicial support

 

• Power: 1000W

  Input: DC12V (Note: Input DC 12V and 24V)

  Output: AC 0-220V-330V-380V-420V and AC18V (multiple voltages)

  Static no-load current: about 0.35A

  Output frequency waveform: about 20KHZ high frequency square wave

  Protection: no protection

    PCB board size: 14.5 cm * 13 cm * height: 3.8 cm

 

 

 

•  

 

• Special reminder: If the load is an electronic switching power supply product, we need to output a high-frequency diode on our board, because the rectifier part of many switching power supplies uses ordinary rectifiers in order to save costs, so it is connected to the "high-frequency AC output. "It will cause the rectifier diode of the original electrical appliance to rapidly heat up and damage it, and the diode will break down the circuit. Eventually cause the inverter board to burn out.

 

• Performance characteristics:

   

        1. The product is widely used. The product has high energy efficiency, long life, low power consumption, convenient and safe use, energy saving and durable. It is a good helper for emergency power outages in the field, night camps, night market vendors, and driving families.

        2. It can be used as the front-stage boost inverter circuit of pure sine wave, modified sine wave, single-silicon machine, and four-silicon machine. For electronic enthusiasts DIY production, maintenance and replacement, manufacturers control cabinet supporting products and so on. .

         3. You can use electrical appliances: lamps, non-inductive household appliances, small rice cookers, (note: support all "electronic products") such as "energy-saving lamps\solder\switching power supply\satellite TV receiver\bulb\LED light \LED energy-saving lamp\fluorescent lamp\DVD player\VCD player\EVD player\LCD TV\color screen TV\flat screen TV\notebook\computer\various computer monitors\all electronic charger products\etc. for reference only"

 

• Notice: 

       1. This board is a high-frequency square wave AC output, so general inductive appliances cannot be carried! ! "Such as: electric motors, electric fans, coil transformers, etc. cannot be used directly"

     Another: simple resistance-capacitance step-down small electrical appliances, cheap resistance-capacitance step-down LED lamps, etc. may not be used

    2. Many multimeters that output high-frequency square-wave AC voltage cannot measure or display low and high levels (it is incorrect, not the actual voltage) (can be measured by the multimeter in DC mode after rectification)

    3. When in use, it is necessary to consider that the power supply should not be in a full-load working state for a long time. If you need to work continuously for a long time, it is recommended to operate at a work efficiency of 80%. Leave room for use to ensure that the power supply can work for a long time, otherwise it may cause artificial early failure.

 

•